Drip, drip, drip… A homeowner’s least favorite noise is a hidden leak somewhere. If you hear the telltale drip or see puddles of water on your floor, you’ll know that you’re dealing with a leak. Unfortunately, water heater leaks are not good signs: they indicate something is broken and needs to be fixed or replaced. If you’re looking for water heater tips for winter season, this article contains insider tricks of the trade to stop leaks in their tracks.
Water Heater Tips For Winter Season
There are different water heaters for various purposes. Some are designed to provide instant hot water, while others are made to store it. The heater you should buy depends on your needs.
It’s important to know how the tankless water heater works, because it is not efficient when it heats up the water that sits in the tank for a long time. If your home needs hot water all day, then you will need an energy efficient tankless heating system that doesn’t use much power and provides instant hot water.
Take Action Immediately
The biggest mistake that homeowners make when dealing with a leak is ignoring it. When water overflows the water heater storage tank and starts to drip down your walls and floors, it’s already too late: there is already some degree of water damage that requires repair or restoration work. If you don’t clean and dry the wet areas and call a plumber to resolve the issue right away, you risk the problem compounding into a massive water damage issue.
Don’t Panic: Act Fast
When you notice a leak, follow these steps right away:
- If possible, clean and dry the wet areas and puddles resulting from the leak.
- Call a water heater repair service to inspect the water heater.
- Depending on the severity of the issue, your plumber will let you know what needs to happen next.
A water heater leak is not always a sign that the whole system is broken. Some minor issues that lead to leaks are easily fixable at home, or can be avoided with regularly scheduled maintenance.
Water Heater Tips for Winter Season: It Might Be a Simpler Issue Thank You Think
- Check the anode rod (for Standard Tank Water Heaters). Unscrew the anode rod. If you notice that it is coated with calcium buildup or is less than ½ inch thick, buy a replacement. The rod itself only costs $20 to $50, and with the proper precautions, you can do it yourself. This rod is very important as it keeps the inside of your tank from corroding.
- Drain the tank and wash out the sediment annually.
- Insulate the pipes and heater so the appliance doesn’t have to work as hard to do its job.
- Make sure that all of the fittings are completely sealed or tightly screwed down.
- Check out our guide to making your water heater last.
Worst Case Scenario: Corrosion Warranting a Full Replacement
The inside of water heaters can corrode from minerals in water over time, which makes water drip down the tank and pool on the floor. A corroded tank, unfortunately, will not be fixable even by the best professionals—you’ll have to schedule a full replacement. You can protect your water heater by flushing it regularly with water softened water.
Schedule Regular Maintenance For Best Results
Here at Shepherd’s Plumbing, Heating, and Air Conditioning, we are committed to providing you with plumbing services that last. Give us a call today at (650)263-6986 or visit our contact us page for any questions or general inquiries about our reputable plumbing services. Visit our blog for even more water heater tips for winter season!